We are VERY excited and grateful that our U.N.C.L.E. gun replicas appear in the bonus material of the U.N.C.L.E. DVD set below. We strive to bring you the best U.N.C.L.E gun replicas available. If you want to see some screen captures from the DVD's using pictures of our U.N.C.L.E. gun replicas click this link:


“For truly great U.N.C.L.E. Special replicas Brad can't be beat.”
Robert Short

Academy Award winner and owner of several original U.N.C.L.E. guns, the U.N.C.L.E. car and Alexander Waverly’s rotating desk


“As for the gun, the man to go to is Brad Ferguson in Amarillo, Texas. He has for sale the best version of the UNCLE gun out there. He is a true artist and has a great affection for the gun, and it shows in his work.”

Jon Heitland 

Author of The Man From U.N.C.L.E. Book


If you want to read a scholarly article about the UNCLE gun written by C. W. Walker, PhD. Check this link: http://www.manfromuncle.org/gun.htm


And to see how The Man From U.N.C.L.E. influenced other TV series see this link: http://hmss.com/otherspies/uncleepisodeguide/unclewa.html


This link will give you an enlarged picture of some of the variations of the U.N.C.L.E. gun I have made. I will add to this as I make more variations:


Airsoft U.N.C.L.E. Gun
We make our airsoft U.N.C.L.E. guns from Maruzen P-38 airsoft pistols and we have engineered them to be able to use our open end U.N.C.L.E. flash hider and still shoot airsoft bb’s. You can also attach the U.N.C.L.E. carbine parts.

Shown with grip version B, our U.N.C.L.E. airsoft is also available with grip versions A and C.

Your airsoft U.N.C.L.E. gun comes with a Maruzen P-38 airsoft with converted barrel, steel open end or closed
end flash hider and plastic U.N.C.L.E. grip. It is capable of using the U.N.C.L.E. carbine parts we make.

Airsoft U.N.C.L.E. Gun with Flat Grip, Short Threaded Barrel and Flash Hider
(AG- $695.00)



Not allowed to own a real gun? Try our plastic copy of one of the original P-38 U.N.C.L.E. Specials used on the Man From UNCLE TV show from the 1960's. It was copied from one that was molded off the original. This piece is an exact copy of the original. You can see the serial and model numbers, the proof marks, and the grip even has the dings that the original has. The original can be seen on the CIA's website. This copy has functioning scope mount slot, functioning stock slot, and solid threaded barrel (7/16 threading, just like the original). If you are going to use a scope mount on this gun we suggest that you use our plastic one to prevent breaking the scope mount slot. Flash Hider sold separately.

Solid Plastic Cast Resin Copy of Original U.N.C.L.E. Gun
(Flash Hider sold separately.)
(PG – $245.00)



* Please note free shipping applies to US orders only. International orders will have shipping calculated and added after the order is placed.

This U.N.C.L.E. gun replica is made of a durable plastic cast resin, anodized aluminum tubing, and a few metal screws. The pistol part is cast from one molded off one of the original guns used on The Man From U.N.C.L.E. TV series.

In order to hold down manufacturing costs and increase the strength of various parts we have epoxied the parts into four groups, pictured below. You can screw the barrel group into the gun barrel, slide the scope and scope mount into the mounting slots on the grip and tighten it to hold, and slide the stock into the back of the grip. All other parts are epoxied together as shown in the picture below. Does not include case.

Solid Plastic Cast Resin and Aluminum Copy of Original U.N.C.L.E. Carbine.

(PC $995.00)


This is an all metal semi-auto blank gun which fires 8mm blanks only and it cannot be made to fire real ammunition. It also comes with an orange plastic plug in the end of the barrel for safe identification as a non-gun. It also comes with your choice of 2 S initials or 2 K initials.

These guns are not legal in Connecticut, Massachusetts, New York, Minnesota, Kansas, Wisconsin, Puerto Rico or Canada. We will not ship to addresses in those states.

Blank Gun with Flat Grip- short, threaded barrel and flash hider
(BGFG-SB $575.00)


Flat Grip Only for P-38 Blank Gun
(BFG $150.00)


Steel replica U.N.C.L.E. flash hiders as used on the TV series.

"Open" End Flash Hider- best choice for airsoft use
(OFH $150.00)


"Closed" End Flash Hider
(CFH $150.00)


U.N.C.L.E. Silencer-black plastic with metal threads

(SIL $150.00)



Functional Steel Replica U.N.C.L.E. Magazines. These were custom made for us by a major U.S. magazine manufacturer. They come in 15 round and 10 round versions, but both versions look exactly alike. Even though these are functional, testing them by cycling a gun’s slide by hand, we find that the 15 round version cycles most reliably when loaded only with 12 rounds. We also have these magazines in an airsoft version. The airsoft version is cosmetic only and will not hold compressed gas and they will not hold cartridges. They also have the tops partially ground down to fit the airsoft’s internals. When shipped to some states they will not have the spring intalled.
We cannot ship these to Massachusetts or Washington, DC.
We can ship only the 10 round magazines to California, Hawaii, Illinois, and New York.

Steel 15 Round Magazine
(15MAG $100.00)

Steel 10 Round Magazine
(10MAG $100.00)

Steel Airsoft Magazine
(AIR-MAG $100.00)


The three grips below are made of high quality black plastic resin and are copies of
three of the original grips used on the Man From U.N.C.L.E. TV series.

A: Rounded Grip for WWII P-38 and for Maruzen P-38 Airsoft
(P-38AG $150.00)


B: Rounded Grip for WWII P-38 and for Maruzen P-38 Airsoft
(P-38BG $150.00)


C: Flat Grip for WWII P-38 and for Maruzen P-38 Airsoft
(P-38CG $150.00)


This non-functioning scope is molded off the exact type of Bushnell Phantom scope used on the original U.N.C.L.E. guns in the TV series. They and the accurate reproduction U.N.C.L.E. scope mount are made of the same tough black plastic resin as the grips above.

Plastic U.N.C.L.E. Scope and Plastic Scope Mount with Steel Thumb Screw
(Plastic scope can be lightly tightened to the scope mount with the two steel screws)
(PSSM- $275.00)


Plastic U.N.C.L.E. Scope only
(PS- $150.00)


Plastic Scope Mount only with Steel Thumb Screw
(PSM- $150.00)


Plastic and Aluminum Non-folding U.N.C.L.E. Stock with Steel Thumb Screw
(Stock does not collapse or fold, but thumb screw allows you to lock it in the grip.)
(PStock- $295.00)


Plastic and Aluminum Extended Barrel and Silencer Group
(Plastic silencer does not detach from barrel, but plastic barrel grip does. Barrel is aluminum.)

(PBarrel – $295.00)


Custom machined steel thumb screws for U.N.C.L.E. scope mount and stock.

Thumb Screw
(TS $19.00)


Man From UNCLE Gun Short Threaded P-38 and Airsoft Barrel

In order to make your own replica Man From U.N.C.L.E. gun you first need a properly shortened and threaded barrel to which you can add the barrel attachments. Until now the only way to get such a barrel was to destroy the usefulness of your original WWII P-38 barrel, or pay up to $200.00 for another one, assuming you could find one to buy, and pay a gunsmith up to another $200.00 to properly cut and thread your barrel. That is no longer necessary.

Our solid plastic barrel was molded from a real WWII P-38 barrel and then cut and threaded with the 7/16 threading of the original Man From U.N.C.L.E. guns. This is made of the same tough polyurethane resin we use in all our replica UNCLE gun parts. It takes exacting detail and is black all the way through, not a painted on black.

    The advantages of using this barrel:

  1. Cost- Your original barrel will cost much more to convert to an U.N.C.L.E. configuration than this barrel costs. And using this barrel you can leave your original barrel in it's original shooting condition.
  2. Versatility- Barrel changes are very quick and easy, and since this barrel will fit both your WWII P-38 and your Maruzen airsoft you can use this barrel in both guns and quickly change them back to original shooting condition. In addition, to convert your airsoft barrel requires you to permanently attach a flash hider to the barrel, which means you would not be able to fit it with other barrel attachments. This barrel gives you complete carbine capabilities.
  3. Realism- when using this barrel on your airsoft it will not shoot bb's. However, your gas magazine will still cycle the action, giving you recoil and the closest sound you can get to the original TV shooting sound effect.
  4. Safety- Most importantly, with this barrel in your WWII P-38 you will not be able to chamber a round.A real barrel that has been shortened and threaded the way the originals were is a very grave safety hazard. Since the flash hider blocks the bullet's path, if you were to accidentally chamber a round and pull the trigger, the gun could explode causing possible serious injury or even death. This cannot happen with our barrel because it is solid and will not accept a round.

Man From UNCLE Gun Short Threaded P-38 and Airsoft Barrel
(SPB- $125.00)


Picture of a P-38 airsoft pistol with full carbine conversion using our plastic
Short Threaded P-38 and Airsoft Barrel and Plastic Extended Magazine.


Plastic Extended Magazines

These magazines are solid polyurethane resin and are black all the way through, not a painted on black finish. We make them to fit our blank gun, the Maruzen p-38 airsoft, and real P-38s. Great for those who cannot find real extended magazines the proper size and look, or for those who live in states that do not allow real high capacity magazines.

Man From UNCLE Gun P-38 Extended Magazine
Blank Gun (PEM-B- $95.00)


Man From UNCLE Gun P-38 Extended Magazine
Airsoft (PEM-A- $95.00)


Man From UNCLE Gun P-38 Extended Magazine
P-38 (PEM-P- $95.00)


Coming Soon – UNCLE Mauser Carbine Replicas